Wagner Tuning Performance Intercooler Kit Mercedes Benz E43 AMG 213

Performance INTERCOOLER KIT Mercedes Benz C/E/GLC 43 AMG

Mercedes Benz W/S/C/A 205 C400 4MATIC 2014-2018

Mercedes Benz W/S/C/A 205 C450AMG 4MATIC 2015-2016

Mercedes Benz W/S/C/A 205 C43 AMG 4MATIC 2016-

Mercedes Benz W/S/C/A 213 E43 AMG 4MATIC 2016-2018

Mercedes Benz W/S/C/A 213 E450 AMG 4MATIC 2018-06/2020

Mercedes Benz X/C 253 GLC 43 AMG 4MATIC 2016-2019

Mercedes Benz C 292 GLE 43 AMG 4MATIC 2015-2019

The 3.0-liter V6 biturbo engine (M 276 DE 30 AL) of the Mercedes 43 AMG models is equipped with an indirect charge air cooling system. The cooling of the charge air is therefore achieved by a water-cooled intercooler, which is replaced by the WagnerTuning high-performance intercooler.

The WAGNERTUNING high-performance intercooler features a novel performance core measuring 222 mm x 297 mm x 95 mm. Specifically developed to meet the demanding requirements of the 43 AMG engine, it offers 133% more external core volume compared to the original intercooler. The optimized ratio of internal to external cooling surface area ensures maximum heat transfer while simultaneously allowing for the best possible internal airflow. The cast aluminum end tanks were designed using CAD and optimized with CFD simulations. The result is outstanding cooling performance with minimal backpressure. This kit is therefore also suitable for racing applications. Optimal cooling of the charged air leads to a significant increase in power!

All WAGNERTUNING intercoolers are equipped with a heat-conducting, anti-corrosion coating, ensuring long-lasting cooling performance. Installation of the system is also straightforward and plug-and-play thanks to our installation instructions. & play feasible.

Advantages of this product:

- significantly improved cooling performance

- less counter pressure

- More power and torque for your engine

- mechanical relief of the turbocharger

- 100% compressive strength

- 100% Plug and Play

- Up to 4 years warranty

- including Ø57mm (2.25inch) aluminum boost pipe

- optionally with 2 x 1/8NPT WMI connectors in the upper end box

Core dimensions of OEM intercooler:

200 mm x 207 mm x 65 mm

V = 2.7 liters

Core dimensions of the WT intercooler:

222 mm x 297 mm x 95 mm

V = 6.3 liters

Not permitted under the German Road Traffic Regulations (StVO).

We receive a large number of custom orders and inquiries daily, so it's not always possible for us to have every item in stock at all times. If you need the item urgently, please contact us. here to our sales team, to check stock levels before making your purchase.

We completely understand if you are unsure whether a part is compatible with your car. Therefore, we strongly recommend that you contact your vehicle manufacturer here. Inquiry to us Please contact us. Our friendly sales team will then get in touch with you to confirm if this part is the correct one you are looking for.

All our products come with a standard 2-year warranty. However, this depends on the type of product. See details below. here.

At Upgrade my Car (R-Trade GmbH), we place great importance on fully informing our customers about the intended use of our products. Please note that, unless otherwise specified, all our products are specifically designed for professional racing use. They are intended exclusively for use in competitions on racetracks sanctioned by an officially recognized racing organization. We would like to point out that any use of our products outside of these conditions, including recreational off-road driving, may potentially violate local, state, or federal laws. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for complying with applicable laws lies solely with the purchaser. We strongly recommend that our customers familiarize themselves with and comply with the relevant legal regulations before using our products.