{"title":"Speed ​​Engineering: Stable brakes through intelligent cooling","description":"\u003cp\u003eAnyone who wants to be fast on the racetrack needs to be able to rely on their brakes. Heat is their biggest enemy. \u003cb data-path-to-node=\"8,0\" data-index-in-node=\"123\"\u003eSpeed ​​Engineering\u003c\/b\u003e Develops highly specialized brake cooling systems that nip thermal problems in the bud. Flow-optimized air intakes and special backing plates direct the airflow precisely to the center of the brake disc. The result: no fading, a consistent pressure point, and significantly reduced wear on expensive pads and discs. A must-have for every BMW M and Audi RS on the track.\u003c\/p\u003e","products":[{"product_id":"bremsenkuhlung-passend-fur-bmw-m2-g87-track-vorderachse-komplettset-von-speed-engineering","title":"Brake cooling suitable for BMW M2 G87 TRACK - front axle complete set from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eQCUN3XD\u003c\/span\u003e\u003cp\u003eThis is the track set for ambitious drivers who like to take their vehicle to the racetrack.\u003c\/p\u003e  \u003cp\u003eBrake cooling for the front axle.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct inlet:\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eTo transport air to the brake cooling outlet, a suitable inlet is essential. The G80\/82 M3\/M4 (as well as the Competition) already has inlet channels in the front bumper from the factory, but these end in the middle of the wheel well. To prevent the air from swirling randomly in the wheel well, we have developed an inlet channel that can be installed with minimal effort and connects the air to the outlet via a hose that runs around the wheel. No tools are required for installation; it simply replaces the original channel. The channel is based on the OEM channel and therefore uses the exact same connection points, making it 100% reversible without leaving any trace.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct outlet:\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eFor many vehicles, brake cooling is recommended even under moderate loads, and even outside of racetracks. This not only improves braking performance but also drastically reduces wear on the friction surfaces. Our backing plate utilizes airflow channeling to the center of the brake disc to harness the turbine effect for internal cooling. We direct the airflow at a specific angle to the disc to minimize heat loss and maximize the efficiency of the available air volume. The lightweight construction, combined with powder-coated aluminum, makes the backing plate sufficiently strong while remaining light and durable. Additionally, the bearings closest to the brake disc are shielded from heat to extend their lifespan (where necessary).\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cp\u003e1x Air duct inlet left\u003c\/p\u003e  \u003cp\u003e1x Air duct inlet right\u003c\/p\u003e  \u003cp\u003e1x left anchor plate\u003c\/p\u003e  \u003cp\u003e1x anchor plate right\u003c\/p\u003e  \u003cp\u003e2x air hose (2 meters)\u003c\/p\u003e  \u003cp\u003e4x hose clamps\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW M4 G82\u003c\/li\u003e  \u003cli\u003eBMW M3 G80\u003c\/li\u003e  \u003cli\u003eBMW M2 G87\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe different models vary slightly in wheel position, and coupled with different chassis geometries and wheel and tire combinations, it's impossible for us to cover all variations. In the worst-case scenario, the wheel might slightly rest on the ground at full steering lock (which should only occur when parking), but this won't damage the tire. In this case, we would ask you to refrain from using the last quarter of the steering wheel rotation.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":48071993229659,"sku":"24763","price":440.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/bremsenkuhlung-passend-fur-bmw-m2-g87-track-vorderachse-komplettset-von-speed-engineering-upgrademycar-1.jpg?v=1714100713"},{"product_id":"bremsenkuhlung-passend-fur-bmw-m3-g8x-track-vorderachse-komplettset-von-speed-engineering","title":"Brake cooling suitable for BMW M3 G8X TRACK - front axle complete set from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eFACP6DD\u003c\/span\u003e\u003cp\u003eThis is the track set for ambitious drivers who like to take their vehicle to the racetrack.\u003c\/p\u003e  \u003cp\u003eBrake cooling for the front axle.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct inlet:\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eTo transport air to the brake cooling outlet, a suitable inlet is essential. The G80\/82 M3\/M4 (as well as the Competition) already has inlet channels in the front bumper from the factory, but these end in the middle of the wheel well. To prevent the air from swirling randomly in the wheel well, we have developed an inlet channel that can be installed with minimal effort and connects the air to the outlet via a hose that runs around the wheel. No tools are required for installation; it simply replaces the original channel. The channel is based on the OEM channel and therefore uses the exact same connection points, making it 100% reversible without leaving any trace.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct outlet:\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eFor many vehicles, brake cooling is recommended even under moderate loads, and even outside of racetracks. This not only improves braking performance but also drastically reduces wear on the friction surfaces. Our backing plate utilizes airflow channeling to the center of the brake disc to harness the turbine effect for internal cooling. We direct the airflow at a specific angle to the disc to minimize heat loss and maximize the efficiency of the available air volume. The lightweight construction, combined with powder-coated aluminum, makes the backing plate sufficiently strong while remaining light and durable. Additionally, the bearings closest to the brake disc are shielded from heat to extend their lifespan (where necessary).\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cp\u003e1x Air duct inlet left\u003c\/p\u003e  \u003cp\u003e1x Air duct inlet right\u003c\/p\u003e  \u003cp\u003e1x left anchor plate\u003c\/p\u003e  \u003cp\u003e1x anchor plate right\u003c\/p\u003e  \u003cp\u003e2x air hose (2 meters)\u003c\/p\u003e  \u003cp\u003e4x hose clamps\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW M4 G82\u003c\/li\u003e  \u003cli\u003eBMW M3 G80\u003c\/li\u003e  \u003cli\u003eBMW M2 G87\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe different models vary slightly in wheel position, and coupled with different chassis geometries and wheel and tire combinations, it's impossible for us to cover all variations. In the worst-case scenario, the wheel might slightly rest on the ground at full steering lock (which should only occur when parking), but this won't damage the tire. In this case, we would ask you to refrain from using the last quarter of the steering wheel rotation.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":48071993360731,"sku":"24764","price":440.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/bremsenkuhlung-passend-fur-bmw-m3-g8x-track-vorderachse-komplettset-von-speed-engineering-upgrademycar-1.jpg?v=1714100713"},{"product_id":"bremsenkuhlung-passend-fur-bmw-m4-g8x-track-vorderachse-komplettset-von-speed-engineering","title":"Brake cooling suitable for BMW M4 G8X TRACK - front axle complete set from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eFACP6DD\u003c\/span\u003e\u003cp\u003eThis is the track set for ambitious drivers who like to take their vehicle to the racetrack.\u003c\/p\u003e  \u003cp\u003eBrake cooling for the front axle.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct inlet:\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eTo transport air to the brake cooling outlet, a suitable inlet is essential. The G80\/82 M3\/M4 (as well as the Competition) already has inlet channels in the front bumper from the factory, but these end in the middle of the wheel well. To prevent the air from swirling randomly in the wheel well, we have developed an inlet channel that can be installed with minimal effort and connects the air to the outlet via a hose that runs around the wheel. No tools are required for installation; it simply replaces the original channel. The channel is based on the OEM channel and therefore uses the exact same connection points, making it 100% reversible without leaving any trace.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct outlet:\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eFor many vehicles, brake cooling is recommended even under moderate loads, and even outside of racetracks. This not only improves braking performance but also drastically reduces wear on the friction surfaces. Our backing plate utilizes airflow channeling to the center of the brake disc to harness the turbine effect for internal cooling. We direct the airflow at a specific angle to the disc to minimize heat loss and maximize the efficiency of the available air volume. The lightweight construction, combined with powder-coated aluminum, makes the backing plate sufficiently strong while remaining light and durable. Additionally, the bearings closest to the brake disc are shielded from heat to extend their lifespan (where necessary).\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cp\u003e1x Air duct inlet left\u003c\/p\u003e  \u003cp\u003e1x Air duct inlet right\u003c\/p\u003e  \u003cp\u003e1x left anchor plate\u003c\/p\u003e  \u003cp\u003e1x anchor plate right\u003c\/p\u003e  \u003cp\u003e2x air hose (2 meters)\u003c\/p\u003e  \u003cp\u003e4x hose clamps\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW M4 G82\u003c\/li\u003e  \u003cli\u003eBMW M3 G80\u003c\/li\u003e  \u003cli\u003eBMW M2 G87\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe different models vary slightly in wheel position, and coupled with different chassis geometries and wheel and tire combinations, it's impossible for us to cover all variations. In the worst-case scenario, the wheel might slightly rest on the ground at full steering lock (which should only occur when parking), but this won't damage the tire. In this case, we would ask you to refrain from using the last quarter of the steering wheel rotation.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":48071993819483,"sku":"24765","price":440.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/bremsenkuhlung-passend-fur-bmw-m4-g8x-track-vorderachse-komplettset-von-speed-engineering-upgrademycar-1.jpg?v=1714100693"},{"product_id":"bremsenkuhlung-passend-fur-bmw-m2-g87-clubsport-set-vorderachse-von-speed-engineering","title":"Brake cooling suitable for BMW M2 G87 Clubsport set front axle from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eL31AOD6\u003c\/span\u003e\u003cp\u003eThis is the Clubsport set with simpler, tool-free assembly for everyday use.\u003c\/p\u003e  \u003cp\u003eBrake cooling for the front axle.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eEasy assembly\u003c\/p\u003e  \u003cp\u003eDisassembling the wheel is not necessary.\u003c\/p\u003e  \u003cp\u003eOne jack is sufficient.\u003c\/p\u003e  \u003cp\u003eTool-free assembly\u003c\/p\u003e  \u003cp\u003eMost vehicles have only minimal cooling at the front axle and usually no cooling at all at the rear axle. Porsche, among others, has recognized that brake cooling is essential for the performance, durability, and lifespan of the brakes and their components.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe geometry of the components is designed to fit the wishbones of the BMW M2, M3, and M4 G series and can be installed plug-and-play with cable ties without a lift or wheel removal. The inlets are designed to be flat, so they do not represent the lowest point of the vehicle and redirect the airflow under the vehicle, directing it precisely to the center of the rotating wheel.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe components are made of PA12 plastic and already include slots for mounting. The continuous narrowing between the inlet and outlet accelerates the airflow while maintaining a constant volume, thus resulting in a controlled airflow.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cp\u003e1x Brake cooling L\u003c\/p\u003e  \u003cp\u003e1x Brake cooling R\u003c\/p\u003e  \u003cp\u003e6x cable ties\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW M2 G87\u003c\/li\u003e  \u003cli\u003eBMW M3 G80\u003c\/li\u003e  \u003cli\u003eBMW M4 G82\u003c\/li\u003e  \u003cli\u003eBMW M2 F82\u003c\/li\u003e  \u003cli\u003eBMW M3 F80\u003c\/li\u003e  \u003cli\u003eBMW M4 F82\u003c\/li\u003e  \u003cli\u003eToyota Supra MK5\u003c\/li\u003e  \u003cli\u003eBMW Z4 G29\u003c\/li\u003e  \u003cli\u003eBMW F20\/F21\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":48071993885019,"sku":"24766","price":180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/bremsenkuhlung-passend-fur-bmw-m2-g87-clubsport-set-vorderachse-von-speed-engineering-upgrademycar-1.jpg?v=1719494541"},{"product_id":"bremsenkuhlung-passend-fur-bmw-m3-g8x-clubsport-set-vorderachse-von-speed-engineering","title":"Brake cooling suitable for BMW M3 G8X Clubsport set front axle from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003ePLJTAQD\u003c\/span\u003e\u003cp\u003eThis is the Clubsport set with simpler, tool-free assembly for everyday use.\u003c\/p\u003e  \u003cp\u003eBrake cooling for the front axle.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eEasy assembly\u003c\/p\u003e  \u003cp\u003eDisassembling the wheel is not necessary.\u003c\/p\u003e  \u003cp\u003eOne jack is sufficient.\u003c\/p\u003e  \u003cp\u003eTool-free assembly\u003c\/p\u003e  \u003cp\u003eMost vehicles have only minimal cooling at the front axle and usually no cooling at all at the rear axle. Porsche, among others, has recognized that brake cooling is essential for the performance, durability, and lifespan of the brakes and their components.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe geometry of the components is designed to fit the wishbones of the BMW M2, M3, and M4 G series and can be installed plug-and-play with cable ties without a lift or wheel removal. The inlets are designed to be flat, so they do not represent the lowest point of the vehicle and redirect the airflow under the vehicle, directing it precisely to the center of the rotating wheel.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe components are made of PA12 plastic and already include slots for mounting. The continuous narrowing between the inlet and outlet accelerates the airflow while maintaining a constant volume, thus resulting in a controlled airflow.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cp\u003e1x Brake cooling L\u003c\/p\u003e  \u003cp\u003e1x Brake cooling R\u003c\/p\u003e  \u003cp\u003e6x cable ties\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW M2 G87\u003c\/li\u003e  \u003cli\u003eBMW M3 G80\u003c\/li\u003e  \u003cli\u003eBMW M4 G82\u003c\/li\u003e  \u003cli\u003eBMW M2 F82\u003c\/li\u003e  \u003cli\u003eBMW M3 F80\u003c\/li\u003e  \u003cli\u003eBMW M4 F82\u003c\/li\u003e  \u003cli\u003eToyota Supra MK5\u003c\/li\u003e  \u003cli\u003eBMW Z4 G29\u003c\/li\u003e  \u003cli\u003eBMW F20\/F21\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":48071994114395,"sku":"24767","price":180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/bremsenkuhlung-passend-fur-bmw-m3-g8x-clubsport-set-vorderachse-von-speed-engineering-upgrademycar-1.jpg?v=1719494541"},{"product_id":"bremsenkuhlung-passend-fur-bmw-m4-g8x-clubsport-set-vorderachse-von-speed-engineering","title":"Brake cooling suitable for BMW M4 G8X Clubsport set front axle from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003ePLJTAQD\u003c\/span\u003e\u003cp\u003eThis is the Clubsport set with simpler, tool-free assembly for everyday use.\u003c\/p\u003e  \u003cp\u003eBrake cooling for the front axle.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eEasy assembly\u003c\/p\u003e  \u003cp\u003eDisassembling the wheel is not necessary.\u003c\/p\u003e  \u003cp\u003eOne jack is sufficient.\u003c\/p\u003e  \u003cp\u003eTool-free assembly\u003c\/p\u003e  \u003cp\u003eMost vehicles have only minimal cooling at the front axle and usually no cooling at all at the rear axle. Porsche, among others, has recognized that brake cooling is essential for the performance, durability, and lifespan of the brakes and their components.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe geometry of the components is designed to fit the wishbones of the BMW M2, M3, and M4 G series and can be installed plug-and-play with cable ties without a lift or wheel removal. The inlets are designed to be flat, so they do not represent the lowest point of the vehicle and redirect the airflow under the vehicle, directing it precisely to the center of the rotating wheel.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe components are made of PA12 plastic and already include slots for mounting. The continuous narrowing between the inlet and outlet accelerates the airflow while maintaining a constant volume, thus resulting in a controlled airflow.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cp\u003e1x Brake cooling L\u003c\/p\u003e  \u003cp\u003e1x Brake cooling R\u003c\/p\u003e  \u003cp\u003e6x cable ties\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW M2 G87\u003c\/li\u003e  \u003cli\u003eBMW M3 G80\u003c\/li\u003e  \u003cli\u003eBMW M4 G82\u003c\/li\u003e  \u003cli\u003eBMW M2 F82\u003c\/li\u003e  \u003cli\u003eBMW M3 F80\u003c\/li\u003e  \u003cli\u003eBMW M4 F82\u003c\/li\u003e  \u003cli\u003eToyota Supra MK5\u003c\/li\u003e  \u003cli\u003eBMW Z4 G29\u003c\/li\u003e  \u003cli\u003eBMW F20\/F21\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":48071994343771,"sku":"24768","price":180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/bremsenkuhlung-passend-fur-bmw-m4-g8x-clubsport-set-vorderachse-von-speed-engineering-upgrademycar-1.jpg?v=1719494542"},{"product_id":"bremsenkuhlung-hinterachse-passend-fur-bmw-m2-g87-von-speed-engineering","title":"Brake cooling rear axle suitable for BMW M2 G87 from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eJU2TBNT\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eOn our race cars, we observed that the inner surface of the rear brake disc (despite a brake upgrade) generates extremely high temperatures. Aside from the high temperatures, the extreme temperature difference between the inner and outer surfaces leads to uneven wear of the brake pads.\u003c\/p\u003e  \u003cp\u003eOur solution works via plug \u0026amp; It's a simple, easy-to-install system that requires no modifications to the vehicle, no installation of hoses, clamps, or other accessories. This results in a wear-free system. We utilize the original mounting points\/shapes on the control arm for attachment.\u003c\/p\u003e  \u003cp\u003eThe air is guided directly into the inside of the rim via a flow channel.\u003c\/p\u003e  \u003cp\u003eDisassembly or modification of the anchor plate is strongly recommended for maximum performance! It would also suffice to cut a small window out of the anchor plate or to strategically place a few 10mm holes in it.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eInstallation\u003c\/p\u003e  \u003cp\u003eVery easy and tool-free installation.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eScope of delivery\u003c\/p\u003e  \u003cp\u003e1x left air duct\u003c\/p\u003e  \u003cp\u003e1x air duct right\u003c\/p\u003e  \u003cp\u003e6x cable ties\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW M2 G87\u003c\/li\u003e  \u003cli\u003eBMW M3 G80\u003c\/li\u003e  \u003cli\u003eBMW M4 G82\u003c\/li\u003e  \u003cli\u003eBMW M2 F82\u003c\/li\u003e  \u003cli\u003eBMW M3 F80\u003c\/li\u003e  \u003cli\u003eBMW M4 F82\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":48493026574683,"sku":"25053","price":240.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/bremsenkuhlung-hinterachse-passend-fur-bmw-m2-g87-von-speed-engineering-upgrademycar-1.jpg?v=1719494068"},{"product_id":"bremsenkuhlung-hinterachse-passend-fur-bmw-m3-g8x-von-speed-engineering","title":"Brake cooling rear axle suitable for BMW M3 G8X from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eTOPDEWM\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eOn our race cars, we observed that the inner surface of the rear brake disc (despite a brake upgrade) generates extremely high temperatures. Aside from the high temperatures, the extreme temperature difference between the inner and outer surfaces leads to uneven wear of the brake pads.\u003c\/p\u003e  \u003cp\u003eOur solution works via plug \u0026amp; It's a simple, easy-to-install system that requires no modifications to the vehicle, no installation of hoses, clamps, or other accessories. This results in a wear-free system. We utilize the original mounting points\/shapes on the control arm for attachment.\u003c\/p\u003e  \u003cp\u003eThe air is guided directly into the inside of the rim via a flow channel.\u003c\/p\u003e  \u003cp\u003eDisassembly or modification of the anchor plate is strongly recommended for maximum performance! It would also suffice to cut a small window out of the anchor plate or to strategically place a few 10mm holes in it.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eInstallation\u003c\/p\u003e  \u003cp\u003eVery easy and tool-free installation.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eScope of delivery\u003c\/p\u003e  \u003cp\u003e1x left air duct\u003c\/p\u003e  \u003cp\u003e1x air duct right\u003c\/p\u003e  \u003cp\u003e6x cable ties\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW M2 G87\u003c\/li\u003e  \u003cli\u003eBMW M3 G80\u003c\/li\u003e  \u003cli\u003eBMW M4 G82\u003c\/li\u003e  \u003cli\u003eBMW M2 F82\u003c\/li\u003e  \u003cli\u003eBMW M3 F80\u003c\/li\u003e  \u003cli\u003eBMW M4 F82\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":48493026607451,"sku":"25054","price":240.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/bremsenkuhlung-hinterachse-passend-fur-bmw-m3-g8x-von-speed-engineering-upgrademycar-1.jpg?v=1719494051"},{"product_id":"bremsenkuhlung-hinterachse-passend-fur-bmw-m4-g8x-von-speed-engineering","title":"Brake cooling rear axle suitable for BMW M4 G8X from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eTOPDEWM\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eOn our race cars, we observed that the inner surface of the rear brake disc (despite a brake upgrade) generates extremely high temperatures. Aside from the high temperatures, the extreme temperature difference between the inner and outer surfaces leads to uneven wear of the brake pads.\u003c\/p\u003e  \u003cp\u003eOur solution works via plug \u0026amp; It's a simple, easy-to-install system that requires no modifications to the vehicle, no installation of hoses, clamps, or other accessories. This results in a wear-free system. We utilize the original mounting points\/shapes on the control arm for attachment.\u003c\/p\u003e  \u003cp\u003eThe air is guided directly into the inside of the rim via a flow channel.\u003c\/p\u003e  \u003cp\u003eDisassembly or modification of the anchor plate is strongly recommended for maximum performance! It would also suffice to cut a small window out of the anchor plate or to strategically place a few 10mm holes in it.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eInstallation\u003c\/p\u003e  \u003cp\u003eVery easy and tool-free installation.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eScope of delivery\u003c\/p\u003e  \u003cp\u003e1x left air duct\u003c\/p\u003e  \u003cp\u003e1x air duct right\u003c\/p\u003e  \u003cp\u003e6x cable ties\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW M2 G87\u003c\/li\u003e  \u003cli\u003eBMW M3 G80\u003c\/li\u003e  \u003cli\u003eBMW M4 G82\u003c\/li\u003e  \u003cli\u003eBMW M2 F82\u003c\/li\u003e  \u003cli\u003eBMW M3 F80\u003c\/li\u003e  \u003cli\u003eBMW M4 F82\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":48493026640219,"sku":"25055","price":240.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/dsc00347-min_1_1.jpg?v=1729361507"},{"product_id":"bremsenkuhlung-hinterachse-passend-fur-audi-s3-8v-von-speed-engineering","title":"Brake cooling rear axle suitable for Audi S3 8V from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eCC7ARXL\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eTo prevent the air from swirling randomly in the wheel well, we have developed an air duct that can be installed with minimal effort.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe brake disc must be exposed to airflow as centrally as possible. To utilize the turbine effect of the brake disc, the channel is mounted on the control arm, ensuring airflow to the center of the disc regardless of the wheel position. It is easily attached using existing mounting pins and requires no permanent modifications to the vehicle.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x air duct for the front axle, left\u003c\/li\u003e  \u003cli\u003e1x air duct for the front axle, right\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eItem suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eAudi RS3 8V\u003c\/li\u003e  \u003cli\u003eAudi S3 8V\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe different models vary slightly in wheel position, and coupled with different chassis geometries and wheel and tire combinations, it's impossible for us to cover all variations. In the worst-case scenario, the wheel might slightly rest on the ground at full steering lock (which should only occur when parking), but this won't damage the tire. In this case, we would ask you to refrain from using the last quarter of the steering wheel rotation.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265907925339,"sku":"25378","price":229.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/audi-rs3-8v-bremsenkuehlung-1-600x600_1_-min.jpg?v=1729361517"},{"product_id":"bremsenkuhlung-vorderachse-passend-fur-audi-rs3-8v-von-speed-engineering","title":"Brake cooling front axle suitable for Audi RS3 8V from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eIJ5PXTJ\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eTo prevent the air from swirling randomly in the wheel well, we have developed an air duct that can be installed with minimal effort.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe brake disc must be exposed to airflow as centrally as possible. To utilize the turbine effect of the brake disc, the channel is mounted on the control arm, ensuring airflow to the center of the disc regardless of the wheel position. It is easily attached using existing mounting pins and requires no permanent modifications to the vehicle.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x air duct for the front axle, left\u003c\/li\u003e  \u003cli\u003e1x air duct for the front axle, right\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eItem suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eAudi RS3 8V\u003c\/li\u003e  \u003cli\u003eAudi S3 8V\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe different models vary slightly in wheel position, and coupled with different chassis geometries and wheel and tire combinations, it's impossible for us to cover all variations. In the worst-case scenario, the wheel might slightly rest on the ground at full steering lock (which should only occur when parking), but this won't damage the tire. In this case, we would ask you to refrain from using the last quarter of the steering wheel rotation.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265908089179,"sku":"25379","price":229.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/audi-rs3-8v-bremsenkuehlung-1-600x600_1_-min_1.jpg?v=1729361517"},{"product_id":"bremsenkuhlung-vorderachse-passend-fur-audi-ttrs-8s-von-speed-engineering","title":"Brake cooling front axle suitable for Audi TTRS 8S from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eSNAHDWG\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp class=\"MsoNormal\"\u003eA well-known problem: your TTRS is fast! That's not the issue in itself, but the heat generated at the front axle during braking is. With this kit, we've found a solution to better cool your brakes.\u003c\/p\u003e  \u003cp class=\"MsoNormal\"\u003e  \u003c\/p\u003e  \u003cp class=\"MsoNormal\"\u003eThe TTRS 8S wheels have an air duct in front of the wheel, designed to direct air into the wheel well. To prevent uncontrolled airflow within the wheel well, we developed a double air duct that can be installed with minimal effort.\u003c\/p\u003e  \u003cp class=\"MsoNormal\"\u003e  \u003c\/p\u003e  \u003cp class=\"MsoNormal\"\u003eThe brake disc needs to be exposed to airflow as centrally as possible. The TTRS 8S brake disc features a large hub with pre-existing openings in the backing plate. Therefore, we decided against developing a conventional backing plate. To utilize the turbine effect of the brake disc, the channel is mounted on the control arm, ensuring airflow to the center of the disc regardless of wheel position. It is easily attached using existing mounting pins and requires no permanent modifications to the vehicle.\u003c\/p\u003e  \u003cp class=\"MsoNormal\"\u003e  \u003c\/p\u003e  \u003cp class=\"MsoNormal\"\u003e*Attention: There are many variations of anchor plates. We recommend modifying\/cutting the anchor plate, or removing the anchor plate entirely.\u003c\/p\u003e  \u003cp class=\"MsoNormal\"\u003e  \u003c\/p\u003e  \u003cp class=\"MsoNormal\"\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cul\u003e  \u003cli class=\"MsoNormal\"\u003e1x air duct for the front axle, left\u003c\/li\u003e  \u003cli class=\"MsoNormal\"\u003e1x air duct for the front axle, right\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp class=\"MsoNormal\"\u003e  \u003c\/p\u003e  \u003cp class=\"MsoNormal\"\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli class=\"MsoNormal\"\u003eAudi TTRS 8S\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp class=\"MsoNormal\"\u003e  \u003c\/p\u003e  \u003cp class=\"MsoNormal\"\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp class=\"MsoNormal\"\u003eThe different models vary slightly in wheel position, and coupled with different chassis geometries and wheel and tire combinations, it's impossible for us to cover all variations. In the worst-case scenario, the wheel might slightly rest on the ground at full steering lock (which should only occur when parking), but this won't damage the tire. In this case, we would ask you to refrain from using the last quarter of the steering wheel rotation.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265911005531,"sku":"25380","price":280.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/audi-ttrs-8j-3-min.jpg?v=1729361523"},{"product_id":"bremsenkuhlung-hinterachse-passend-fur-bmw-m3-e90-e92-von-speed-engineering","title":"Brake cooling rear axle suitable for BMW M3 E90\/E92 from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eUF22M31\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eOn our race cars, we observed that the inner surface of the rear brake disc (despite a brake upgrade) became extremely hot. Aside from the excessive temperature, the extreme temperature difference between the inner and outer surfaces led to uneven wear of the brake pads. Our solution is Plug. \u0026amp; The system is easy to install and requires no modifications to the vehicle, no installation of hoses, clamps, or other accessories. Air is directed to the inside of the brake disc via an air duct. To increase the air volume, we use an additional duct system to create negative pressure in the duct, drawing in more cool air flowing under the vehicle.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eOnly the removal of the anchor plate makes the use of our system worthwhile!\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x left air duct\u003c\/li\u003e  \u003cli\u003e1x right air duct\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW E92 M3\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe different models vary slightly in wheel position, and coupled with different chassis geometries and wheel and tire combinations, it's impossible for us to cover all variations. In the worst-case scenario, the wheel might slightly rest on the ground at full steering lock (which should only occur when parking), but this won't damage the tire. In this case, we would ask you to refrain from using the last quarter of the steering wheel rotation.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265912512859,"sku":"25381","price":139.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/dsc08128-600x600-min.jpg?v=1729361523"},{"product_id":"bremsenkuhlung-vorderachse-passend-fur-bmw-1-f20-f21-vorfacelift-track-komplettset-von-speed-engineering","title":"Brake cooling front axle suitable for BMW 1 F20\/F21 pre-facelift TRACK complete set from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eSPYEHIH\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eFor many vehicles, brake cooling is recommended even under moderate stress, and even outside of racetracks. This not only improves braking performance but also drastically reduces wear on the friction surfaces. Do you regularly hit the track and push your pre-facelift F20\/21 to its limits? Then we have the perfect solution for you to cool your brake system with maximum efficiency!\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct inlet\u003c\/p\u003e  \u003cp\u003eOur track kit is designed for the F20\/F21 (pre-facelift version with M Sport package bumper). Intended for regular track use, this brake cooling kit offers maximum cooling performance. We supply flow-optimized funnels that replace the original intake funnels in the front bumper and the brake cooling duct, and feature a standard 51mm ventilation hose connection.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct outlet\u003c\/p\u003e  \u003cp\u003eWe utilize the channeling of the airflow towards the center of the brake disc to harness the turbine effect for cooling the disc from within. The airflow is directed at the disc at a precise angle to minimize dispersion losses, ensuring maximum efficiency in utilizing the air volume. The lightweight construction, combined with powder-coated aluminum, makes the component sufficiently strong while remaining light and robust.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eScope of delivery\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x Air duct inlet left\u003c\/li\u003e  \u003cli\u003e1x Air duct inlet right\u003c\/li\u003e  \u003cli\u003e2x mounting screws\u003c\/li\u003e  \u003cli\u003e2x washer\u003c\/li\u003e  \u003cli\u003e1x anchor plate for the front axle, 1x left\u003c\/li\u003e  \u003cli\u003e1x anchor plate for the front axle, 1x right\u003c\/li\u003e  \u003cli\u003e2x air hose = 2 meters\u003c\/li\u003e  \u003cli\u003e4x hose clamp\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW F20\/21 pre-facelift model\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThese parts are motorsport products and are not automatically approved for road use. Individual approval according to §21 by TÜV is required. We explicitly point out that none of the products we offer for sale are original vehicle parts from BMW AG, M GmbH, MINI, VAG, or any other vehicle manufacturer. The mention of vehicle makes and models serves solely to identify the product and its compatibility with the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265915134299,"sku":"25382","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/dsc03671-1.jpg-min_1.jpg?v=1729361525"},{"product_id":"bremsenkuhlung-vorderachse-passend-fur-bmw-1-f20-f21-lci-facelift-track-komplettset-von-speed-engineering","title":"Brake cooling front axle suitable for BMW 1 F20\/F21 LCI Facelift TRACK complete set from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eAEBU90P\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eAre you a regular on the track, pushing your F20\/21 LCI facelift to the limit? Then we have the perfect solution for cooling your brake system!\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct inlet\u003c\/p\u003e  \u003cp\u003eOur track kit is designed for the F20\/F21 LCI (facelift version with M Sport bumper). Intended for regular track use, this brake cooling kit offers maximum cooling performance. We supply flow-optimized funnels that replace the original intake funnels in the front bumper and the brake cooling duct, and feature a standard 51mm ventilation hose connection.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct outlet\u003c\/p\u003e  \u003cp\u003eWe utilize the channeling of the airflow towards the center of the brake disc to harness the turbine effect for cooling the disc from within. The airflow is directed at the disc at a precise angle to minimize dispersion losses, ensuring maximum efficiency in utilizing the air volume. The lightweight construction, combined with powder-coated aluminum, makes the component sufficiently strong while remaining light and robust.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIMPORTANT: The different models vary slightly in wheel position, and coupled with different chassis geometries, as well as wheel and tire combinations, it is impossible for us to cover all variations. In the worst case, the wheel might slightly touch the ground at full steering lock (which should only occur when parking), but this will not damage the tire.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eScope of delivery\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x air duct inlet for the front axle, 1x left\u003c\/li\u003e  \u003cli\u003e1x air duct inlet for the front axle, 1x right\u003c\/li\u003e  \u003cli\u003e1x anchor plate for the front axle, 1x left\u003c\/li\u003e  \u003cli\u003e1x anchor plate for the front axle, 1x right\u003c\/li\u003e  \u003cli\u003e2x air hose = 2 meters\u003c\/li\u003e  \u003cli\u003e4x hose clamp\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eF20\/F21 Facelift models with M package bumper\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThese parts are motorsport products and are not automatically approved for road use. Individual approval according to §21 by TÜV is required. We explicitly point out that none of the products we offer for sale are original vehicle parts from BMW AG, M GmbH, MINI, VAG, or any other vehicle manufacturer. The mention of vehicle makes and models serves solely to identify the product and its compatibility with the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265915167067,"sku":"25383","price":389.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/storkmedia-38-600x600_1_-min.jpg?v=1729361530"},{"product_id":"bremsenkuhlung-hinterachse-passend-fur-bmw-m2-f8x-von-speed-engineering","title":"Brake cooling rear axle suitable for BMW M2 F8X from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eP1Y0FMG\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eOn our race cars, we observed that the inner surface of the rear brake disc (despite a brake upgrade) generates extremely high temperatures. Aside from the high temperatures, the extreme temperature difference between the inner and outer surfaces leads to uneven wear of the brake pads.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eOur solution works via plug \u0026amp; It's a simple, easy-to-install system that requires no modifications to the vehicle, no installation of hoses, clamps, or other accessories. This results in a wear-free system. We utilize the original mounting points\/shapes on the control arm for attachment.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe air is guided directly into the inside of the rim via a flow channel.\u003c\/p\u003e  \u003cp\u003eDisassembly or modification of the anchor plate is strongly recommended for maximum performance! It would also suffice to cut a small window out of the anchor plate or to strategically place a few 10mm holes in it.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eInstallation\u003c\/p\u003e  \u003cp\u003eVery easy and tool-free installation.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eScope of delivery\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x left air duct\u003c\/li\u003e  \u003cli\u003e1x air duct right\u003c\/li\u003e  \u003cli\u003e6x cable ties\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eAll M models of the F series and G series\u003c\/li\u003e  \u003cli\u003eM2, M2C, M4, M4C, M3\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265917034843,"sku":"25384","price":240.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/0o4a3455-scaled.jpg-min.jpg?v=1729361533"},{"product_id":"bremsenkuhlung-hinterachse-passend-fur-bmw-m3-f8x-von-speed-engineering","title":"Brake cooling rear axle suitable for BMW M3 F8X from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eCSN0FMT\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eOn our race cars, we observed that the inner surface of the rear brake disc (despite a brake upgrade) generates extremely high temperatures. Aside from the high temperatures, the extreme temperature difference between the inner and outer surfaces leads to uneven wear of the brake pads.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eOur solution works via plug \u0026amp; It's a simple, easy-to-install system that requires no modifications to the vehicle, no installation of hoses, clamps, or other accessories. This results in a wear-free system. We utilize the original mounting points\/shapes on the control arm for attachment.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe air is guided directly into the inside of the rim via a flow channel.\u003c\/p\u003e  \u003cp\u003eDisassembly or modification of the anchor plate is strongly recommended for maximum performance! It would also suffice to cut a small window out of the anchor plate or to strategically place a few 10mm holes in it.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eInstallation\u003c\/p\u003e  \u003cp\u003eVery easy and tool-free installation.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eScope of delivery\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x left air duct\u003c\/li\u003e  \u003cli\u003e1x air duct right\u003c\/li\u003e  \u003cli\u003e6x cable ties\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eAll M models of the F series and G series\u003c\/li\u003e  \u003cli\u003eM2, M2C, M4, M4C, M3\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265919131995,"sku":"25385","price":240.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/0o4a3455-scaled.jpg-min_1.jpg?v=1729361535"},{"product_id":"bremsenkuhlung-hinterachse-passend-fur-bmw-m4-f8x-von-speed-engineering","title":"Brake cooling rear axle suitable for BMW M4 F8X from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eCSN0FMT\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eOn our race cars, we observed that the inner surface of the rear brake disc (despite a brake upgrade) generates extremely high temperatures. Aside from the high temperatures, the extreme temperature difference between the inner and outer surfaces leads to uneven wear of the brake pads.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eOur solution works via plug \u0026amp; It's a simple, easy-to-install system that requires no modifications to the vehicle, no installation of hoses, clamps, or other accessories. This results in a wear-free system. We utilize the original mounting points\/shapes on the control arm for attachment.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe air is guided directly into the inside of the rim via a flow channel.\u003c\/p\u003e  \u003cp\u003eDisassembly or modification of the anchor plate is strongly recommended for maximum performance! It would also suffice to cut a small window out of the anchor plate or to strategically place a few 10mm holes in it.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eInstallation\u003c\/p\u003e  \u003cp\u003eVery easy and tool-free installation.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eScope of delivery\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x left air duct\u003c\/li\u003e  \u003cli\u003e1x air duct right\u003c\/li\u003e  \u003cli\u003e6x cable ties\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eAll M models of the F series and G series\u003c\/li\u003e  \u003cli\u003eM2, M2C, M4, M4C, M3\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265921655131,"sku":"25386","price":240.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/0o4a3455-scaled.jpg-min_1_1.jpg?v=1729361535"},{"product_id":"bremsenkuhlung-vorderachse-passend-fur-bmw-m4-f8x-clubsport-set-von-speed-engineering","title":"Brake cooling front axle suitable for BMW M4 F8X Clubsport Set from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eRPF39EL\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eThis is the Clubsport set, featuring simpler, tool-free installation for everyday use. Ambitious drivers who enjoy taking their vehicle to the racetrack should choose the Track set.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe development\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eEasy assembly\u003c\/li\u003e  \u003cli\u003eDisassembling the wheel is not necessary.\u003c\/li\u003e  \u003cli\u003eOne jack is sufficient.\u003c\/li\u003e  \u003cli\u003eTool-free assembly\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMost vehicles have only minimal cooling at the front axle and usually no cooling at all at the rear axle. Porsche, among others, has recognized that brake cooling is essential for the performance, durability, and lifespan of the brakes and their components.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe geometry of the components is designed to fit the wishbones of the BMW M2, M3, and M4 G series and can be installed plug-and-play with cable ties without a lift or wheel removal. The inlets are designed to be flat, so they do not represent the lowest point of the vehicle and redirect the airflow under the vehicle, directing it precisely to the center of the rotating wheel.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe components are made of PA12 plastic and already include slots for mounting. The continuous narrowing between the inlet and outlet accelerates the airflow while maintaining a constant volume, thus resulting in a controlled airflow.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eWhat about the rear axle?\u003c\/p\u003e  \u003cp\u003eIt is not possible to cover every vehicle and every axle with a tailor-made solution, and therefore we have developed a universal cooling system and tested it intensively on a wide variety of vehicles over several months.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eA difference of up to 50°C at the peak temperature across the measuring tape can be observed here. However, if holes are drilled in the anchor plate, or it is removed, maximum performance is achieved with a delta of up to 200°C.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x Brake cooling L\u003c\/li\u003e  \u003cli\u003e1x Brake cooling R\u003c\/li\u003e  \u003cli\u003e6x cable ties\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW M2 G87\u003c\/li\u003e  \u003cli\u003eBMW M3 G80\u003c\/li\u003e  \u003cli\u003eBMW M4 G82\u003c\/li\u003e  \u003cli\u003eBMW M2 F82\u003c\/li\u003e  \u003cli\u003eBMW M3 F80\u003c\/li\u003e  \u003cli\u003eBMW M4 F82\u003c\/li\u003e  \u003cli\u003eToyota Supra MK5\u003c\/li\u003e  \u003cli\u003eBMW Z4 G29\u003c\/li\u003e  \u003cli\u003eBMW F20\/F21\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265921786203,"sku":"25387","price":180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/storkmedia-6-1-scaled.jpg_1_-min.jpg?v=1729361541"},{"product_id":"bremsenkuhlung-vorderachse-passend-fur-bmw-m3-f8x-clubsport-set-von-speed-engineering","title":"Brake cooling front axle suitable for BMW M3 F8X Clubsport Set from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eRPF39EL\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eThis is the Clubsport set, featuring simpler, tool-free installation for everyday use. Ambitious drivers who enjoy taking their vehicle to the racetrack should choose the Track set.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe development\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eEasy assembly\u003c\/li\u003e  \u003cli\u003eDisassembling the wheel is not necessary.\u003c\/li\u003e  \u003cli\u003eOne jack is sufficient.\u003c\/li\u003e  \u003cli\u003eTool-free assembly\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMost vehicles have only minimal cooling at the front axle and usually no cooling at all at the rear axle. Porsche, among others, has recognized that brake cooling is essential for the performance, durability, and lifespan of the brakes and their components.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe geometry of the components is designed to fit the wishbones of the BMW M2, M3, and M4 G series and can be installed plug-and-play with cable ties without a lift or wheel removal. The inlets are designed to be flat, so they do not represent the lowest point of the vehicle and redirect the airflow under the vehicle, directing it precisely to the center of the rotating wheel.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe components are made of PA12 plastic and already include slots for mounting. The continuous narrowing between the inlet and outlet accelerates the airflow while maintaining a constant volume, thus resulting in a controlled airflow.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eWhat about the rear axle?\u003c\/p\u003e  \u003cp\u003eIt is not possible to cover every vehicle and every axle with a tailor-made solution, and therefore we have developed a universal cooling system and tested it intensively on a wide variety of vehicles over several months.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eA difference of up to 50°C at the peak temperature across the measuring tape can be observed here. However, if holes are drilled in the anchor plate, or it is removed, maximum performance is achieved with a delta of up to 200°C.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x Brake cooling L\u003c\/li\u003e  \u003cli\u003e1x Brake cooling R\u003c\/li\u003e  \u003cli\u003e6x cable ties\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW M2 G87\u003c\/li\u003e  \u003cli\u003eBMW M3 G80\u003c\/li\u003e  \u003cli\u003eBMW M4 G82\u003c\/li\u003e  \u003cli\u003eBMW M2 F82\u003c\/li\u003e  \u003cli\u003eBMW M3 F80\u003c\/li\u003e  \u003cli\u003eBMW M4 F82\u003c\/li\u003e  \u003cli\u003eToyota Supra MK5\u003c\/li\u003e  \u003cli\u003eBMW Z4 G29\u003c\/li\u003e  \u003cli\u003eBMW F20\/F21\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265923457371,"sku":"25388","price":180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/storkmedia-6-1-scaled.jpg_1_-min_1.jpg?v=1729361544"},{"product_id":"bremsenkuhlung-vorderachse-passend-fur-bmw-m2-f8x-clubsport-set-von-speed-engineering","title":"Brake cooling front axle suitable for BMW M2 F8X Clubsport Set from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003ePDEYE4O\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003eThis is the Clubsport set, featuring simpler, tool-free installation for everyday use. More ambitious drivers who enjoy taking their vehicles to the racetrack should choose the Track set.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe development\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eEasy assembly\u003c\/li\u003e  \u003cli\u003eDisassembling the wheel is not necessary.\u003c\/li\u003e  \u003cli\u003eOne jack is sufficient.\u003c\/li\u003e  \u003cli\u003eTool-free assembly\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMost vehicles have only minimal cooling at the front axle and usually no cooling at all at the rear axle. Porsche, among others, has recognized that brake cooling is essential for the performance, durability, and lifespan of the brakes and their components.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe geometry of the components is designed to fit the wishbones of the BMW M2, M3, and M4 G series and can be installed plug-and-play with cable ties without a lift or wheel removal. The inlets are designed to be flat, so they do not represent the lowest point of the vehicle and redirect the airflow under the vehicle, directing it precisely to the center of the rotating wheel.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe components are made of PA12 plastic and already include slots for mounting. The continuous tapering between the inlet and outlet accelerates the airflow while maintaining a constant volume, thus resulting in a controlled airflow.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eWhat about the rear axle?\u003c\/p\u003e  \u003cp\u003eIt is not possible to cover every vehicle and every axle with a tailor-made solution, and therefore we have developed a universal cooling system and tested it intensively on a wide variety of vehicles over several months.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eA difference of up to 50°C at the peak temperature across the measuring tape can be observed here. However, if holes are drilled in the anchor plate, or it is removed, maximum performance is achieved with a delta of up to 200°C.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x Brake cooling L\u003c\/li\u003e  \u003cli\u003e1x Brake cooling R\u003c\/li\u003e  \u003cli\u003e6x cable ties\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW M2 G87\u003c\/li\u003e  \u003cli\u003eBMW M3 G80\u003c\/li\u003e  \u003cli\u003eBMW M4 G82\u003c\/li\u003e  \u003cli\u003eBMW M2 F82\u003c\/li\u003e  \u003cli\u003eBMW M3 F80\u003c\/li\u003e  \u003cli\u003eBMW M4 F82\u003c\/li\u003e  \u003cli\u003eToyota Supra MK5\u003c\/li\u003e  \u003cli\u003eBMW Z4 G29\u003c\/li\u003e  \u003cli\u003eBMW F20\/F21\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265923490139,"sku":"25389","price":180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/storkmedia-6-1-scaled.jpg_1_-min_1_1.jpg?v=1729361546"},{"product_id":"bremsenkuhlung-vorderachse-passend-fur-bmw-m3-f80-komplettset-von-speed-engineering","title":"Brake cooling front axle suitable for BMW M3 F80 complete set from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eF31TDRO\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct inlet:\u003c\/p\u003e  \u003cp\u003eTo transport air to the brake cooling outlet, a suitable intake is essential. The M3\/M4 does not have intake ducts in the front bumper from the factory, unlike other models. z.B The M2 Competition. However, what your car has are two radiators on the sides behind the bumper! So why not utilize the existing airflow?\u003c\/p\u003e  \u003cp\u003eTo prevent the air from swirling randomly in the wheel well after the radiators, we developed a guide duct that can be installed with minimal effort. This duct directs the air around the wheel and connects to the outlet via a 40 cm hose (per side). Our tests have shown that this prevents significant back pressure from building up behind the radiator, and even at extreme speeds and increasing pressure, the ducts do not obstruct the escaping air from behind the radiator.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct outlet:\u003c\/p\u003e  \u003cp\u003eFor many vehicles (including the F80\/F82), brake cooling is recommended even under moderate loads, and even outside of racetracks. This not only improves braking performance but also drastically reduces wear on the friction surfaces. Our backing plate utilizes airflow channeling to the center of the brake disc to harness the turbine effect for internal cooling. We direct the airflow at a specific angle to the disc to minimize heat loss and maximize the efficiency of the available air volume. The lightweight construction, combined with powder-coated aluminum, makes the backing plate sufficiently strong while remaining light and durable. Additionally, the bearings closest to the brake disc are shielded from heat to extend their lifespan (where necessary).\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x Air duct inlet left\u003c\/li\u003e  \u003cli\u003e1x Air duct inlet right\u003c\/li\u003e  \u003cli\u003e1x Air duct outlet left\u003c\/li\u003e  \u003cli\u003e1x Air duct outlet right\u003c\/li\u003e  \u003cli\u003e1x air hose 1 meter\u003c\/li\u003e  \u003cli\u003e6x mounting screws\u003c\/li\u003e  \u003cli\u003e6x washer\u003c\/li\u003e  \u003cli\u003e4x hose clamp\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW F80 M3\u003c\/li\u003e  \u003cli\u003eBMW F82 M4\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe different models vary slightly in wheel position, and coupled with different chassis geometries and wheel and tire combinations, it's impossible for us to cover all variations. In the worst-case scenario, the wheel might slightly rest on the ground at full steering lock (which should only occur when parking), but this won't damage the tire. In this case, we would ask you to refrain from using the last quarter of the steering wheel rotation.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265924571483,"sku":"25390","price":440.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/storkmedia-13-600x600-min.jpg?v=1729361545"},{"product_id":"bremsenkuhlung-vorderachse-passend-fur-bmw-m4-f82-komplettset-von-speed-engineering","title":"Brake cooling front axle suitable for BMW M4 F82 complete set from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eKFIFPO0\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct inlet:\u003c\/p\u003e  \u003cp\u003eTo transport air to the brake cooling outlet, a suitable intake is essential. The M3\/M4 does not have intake ducts in the front bumper from the factory, unlike other models. z.B The M2 Competition. However, what your car has are two radiators on the sides behind the bumper! So why not utilize the existing airflow?\u003c\/p\u003e  \u003cp\u003eTo prevent the air from swirling randomly in the wheel well after the radiators, we developed a guide duct that can be installed with minimal effort. This duct directs the air around the wheel and connects to the outlet via a 40 cm hose (per side). Our tests have shown that this prevents significant back pressure from building up behind the radiator, and even at extreme speeds and increasing pressure, the ducts do not obstruct the escaping air from behind the radiator.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct outlet:\u003c\/p\u003e  \u003cp\u003eFor many vehicles (including the F80\/F82), brake cooling is recommended even under moderate loads, and even outside of racetracks. This not only improves braking performance but also drastically reduces wear on the friction surfaces. Our backing plate utilizes airflow channeling to the center of the brake disc to harness the turbine effect for internal cooling. We direct the airflow at a specific angle to the disc to minimize heat loss and maximize the efficiency of the available air volume. The lightweight construction, combined with powder-coated aluminum, makes the backing plate sufficiently strong while remaining light and durable. Additionally, the bearings closest to the brake disc are shielded from heat to extend their lifespan (where necessary).\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x Air duct inlet left\u003c\/li\u003e  \u003cli\u003e1x Air duct inlet right\u003c\/li\u003e  \u003cli\u003e1x Air duct outlet left\u003c\/li\u003e  \u003cli\u003e1x Air duct outlet right\u003c\/li\u003e  \u003cli\u003e1x air hose 1 meter\u003c\/li\u003e  \u003cli\u003e6x mounting screws\u003c\/li\u003e  \u003cli\u003e6x washer\u003c\/li\u003e  \u003cli\u003e4x hose clamp\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW F80 M3\u003c\/li\u003e  \u003cli\u003eBMW F82 M4\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe different models vary slightly in wheel position, and coupled with different chassis geometries and wheel and tire combinations, it's impossible for us to cover all variations. In the worst-case scenario, the wheel might slightly rest on the ground at full steering lock (which should only occur when parking), but this won't damage the tire. In this case, we would ask you to refrain from using the last quarter of the steering wheel rotation.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265925849435,"sku":"25391","price":440.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/storkmedia-13-600x600-min_1.jpg?v=1729361551"},{"product_id":"bremsenkuhlung-vorderachse-passend-fur-bmw-m2-f87-komplettset-von-speed-engineering","title":"Brake cooling front axle suitable for BMW M2 F87 complete set from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eVEE1ANK\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct inlet:\u003c\/p\u003e  \u003cp\u003eTo transport air to the brake cooling outlet, a suitable intake is essential. The M2 F87 does not have intake ducts in the front bumper from the factory, unlike other models. z.B The M2 Competition F87N. However, what your car has are two radiators on the sides behind the bumper! So why not utilize the existing airflow?\u003c\/p\u003e  \u003cp\u003eTo prevent the air from swirling randomly in the wheel well after the radiators, we developed a guide duct that can be installed with minimal effort. This duct directs the air around the wheel and connects to the outlet via a 40 cm hose (per side). Our tests have shown that this prevents significant back pressure from building up behind the radiator, and even at extreme speeds and increasing pressure, the ducts do not obstruct the escaping air from behind the radiator.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct outlet:\u003c\/p\u003e  \u003cp\u003eFor many vehicles (including the M2), brake cooling is recommended even under moderate loads, and even outside of racetracks. This not only improves braking performance but also drastically reduces wear on the friction surfaces. Our backing plate utilizes airflow channeling to the center of the brake disc to harness the turbine effect for internal cooling. We direct the airflow at a specific angle to the disc to minimize heat loss and maximize the efficiency of the available air volume. The lightweight construction, combined with powder-coated aluminum, makes the backing plate sufficiently strong while remaining light and durable. Additionally, the bearings closest to the brake disc are shielded from heat to extend their lifespan (where necessary).\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIncluded in the delivery:\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x Air duct inlet left\u003c\/li\u003e  \u003cli\u003e1x Air duct inlet right\u003c\/li\u003e  \u003cli\u003e1x Air duct outlet left\u003c\/li\u003e  \u003cli\u003e1x Air duct outlet right\u003c\/li\u003e  \u003cli\u003e1x air hose 1 meter\u003c\/li\u003e  \u003cli\u003e6x mounting screws\u003c\/li\u003e  \u003cli\u003e6x washer\u003c\/li\u003e  \u003cli\u003e4x hose clamp\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW M2 (not Competition)\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eWe also have a suitable kit for the M2C in our shop.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe different models vary slightly in wheel position, and coupled with different chassis geometries and wheel and tire combinations, it's impossible for us to cover all variations. In the worst-case scenario, the wheel might slightly rest on the ground at full steering lock (which should only occur when parking), but this won't damage the tire. In this case, we would ask you to refrain from using the last quarter of the steering wheel rotation.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265928470875,"sku":"25392","price":440.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/storkmedia-12-600x600-min_731aa2cd-9279-4430-9479-3347fc952f63.jpg?v=1729361555"},{"product_id":"bremsenkuhlung-vorderachse-passend-fur-bmw-m2-competition-f87-komplettset-von-speed-engineering","title":"Brake cooling front axle suitable for BMW M2 Competition F87 complete set from Speed ​​Engineering","description":"\u003cspan style=\"display:none\"\u003eT33UWXU\u003c\/span\u003e\u003cp\u003eDescription\u003c\/p\u003e  \u003cp\u003e100% Made in Germany!\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct inlet\u003c\/p\u003e  \u003cp\u003eTo transport air to the brake cooling outlet, a suitable inlet is essential. The M2 Competition already has inlet channels in the front bumper as standard, but these end in the middle of the wheel arch. To prevent the air from swirling randomly in the wheel arch, we have developed an extension for the air duct that can be installed with minimal effort. This extension guides the air around the wheel and connects it to the outlet via a hose.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eAir duct outlet\u003c\/p\u003e  \u003cp\u003eFor many vehicles, brake cooling is recommended even under moderate loads, and even outside of racetracks. This not only improves braking performance but also drastically reduces wear on the friction surfaces. Our backing plate utilizes airflow channeling to the center of the brake disc to harness the turbine effect for internal cooling. We direct the airflow at a specific angle to the disc to minimize heat loss and maximize the efficiency of the available air volume. The lightweight construction, combined with powder-coated aluminum, makes the backing plate sufficiently strong while remaining light and durable. Additionally, the bearings closest to the brake disc are shielded from heat to extend their lifespan (where necessary).\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eIMPORTANT: The different models vary slightly in wheel position, and combined with different chassis geometries and wheel and tire combinations, it is impossible for us to cover all variations. In the worst case, the wheel could slightly rest on the ground at full steering lock (which should only occur when parking), but this will not damage the tire. In this case, we would ask you to refrain from turning the steering wheel for the last quarter of its rotation.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe inlets may be supplied in grey, different from the illustration.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eScope of delivery\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1x Air duct inlet left\u003c\/li\u003e  \u003cli\u003e1x Air duct inlet right\u003c\/li\u003e  \u003cli\u003e1x Air duct outlet left\u003c\/li\u003e  \u003cli\u003e1x Air duct outlet right\u003c\/li\u003e  \u003cli\u003e1x air hose 1 meter\u003c\/li\u003e  \u003cli\u003e6x mounting screws\u003c\/li\u003e  \u003cli\u003e6x washer\u003c\/li\u003e  \u003cli\u003e4x hose clamp\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThis item is suitable for\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eBMW F87N M2C, M2 CS\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or any other vehicle manufacturers. The mention of vehicle makes and models serves solely for product identification and assignment to the appropriate vehicle type.\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003eThe different models vary slightly in wheel position, and coupled with different chassis geometries and wheel and tire combinations, it's impossible for us to cover all variations. In the worst-case scenario, the wheel might slightly rest on the ground at full steering lock (which should only occur when parking), but this won't damage the tire. In this case, we would ask you to refrain from using the last quarter of the steering wheel rotation.\u003c\/p\u003e\u003cspan style=\"display:none\"\u003eQOIHW8Y\u003c\/span\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":49265928503643,"sku":"25393","price":440.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/0o4a3407-scaled.jpg-min.jpg?v=1729361554"},{"product_id":"canards-v2-fur-bmw-m2-g87-von-speed-engineering-mehr-downforce-motorsport-look","title":"Canards V2 for BMW M2 G87 from Speed ​​Engineering - more downforce \u0026 motorsport look","description":"\u003ch3 data-start=\"259\" data-end=\"369\" class=\"\"\u003e\u003cstrong data-start=\"263\" data-end=\"369\"\u003e\u003cspan\u003eSpeed ​​Engineering canards with TÜV parts certificate for BMW M2 G87 – Increased downforce \u0026amp; Racing look\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e  \u003cp data-start=\"371\" data-end=\"682\" class=\"\"\u003e\u003cstrong data-start=\"371\" data-end=\"514\"\u003e\u003cspan\u003eMaximum performance, aggressive looks and road approval – all combined in a high-quality aerodynamic component from Speed ​​Engineering\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e ,  Specifically designed for the BMW M2 G87. As an authorized dealer, we offer you this \u003c\/span\u003e\u003cstrong data-start=\"603\" data-end=\"649\"\u003e\u003cspan\u003ePerfectly fitting canards with TÜV parts certificate\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003e direct \u003c\/span\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003ein \u003c\/span\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003eour \u003c\/span\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003eonline shop\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003edirectly in our online shop.\u003c\/span\u003e\u003c\/p\u003e  \u003cp data-start=\"684\" data-end=\"895\" class=\"\"\u003e\u003cspan\u003eThe canards generate airflow through targeted air deflection. \u003c\/span\u003e\u003cstrong data-start=\"734\" data-end=\"775\"\u003e\u003cspan\u003enoticeably more downforce\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e on the front axle, thus improving driving stability – especially during sporty driving or on the racetrack.\u003c\/span\u003e\u003c\/p\u003e  \u003ch3 data-start=\"897\" data-end=\"954\" class=\"\"\u003e\u003cstrong data-start=\"901\" data-end=\"954\"\u003e\u003cspan\u003eTÜV parts certificate included – legal \u0026amp; stress-free\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e  \u003cp data-start=\"955\" data-end=\"1224\" class=\"\"\u003e\u003cspan\u003eSpeed ​​Engineering's canards are equipped with a \u003c\/span\u003e\u003cstrong data-start=\"1006\" data-end=\"1028\"\u003e\u003cspan\u003eTÜV parts certificate\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e delivered and are therefore \u003c\/span\u003e\u003cstrong data-start=\"1057\" data-end=\"1092\"\u003e\u003cspan\u003eLegally registrable in Germany\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003eabsolutely \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e.  Important: Please be sure to include the following information when placing your order: \u003c\/span\u003e\u003cstrong data-start=\"1149\" data-end=\"1170\"\u003e\u003cspan\u003echassis number\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e so that we can include the appropriate expert report.\u003c\/span\u003e\u003c\/p\u003e  \u003ch3 data-start=\"1226\" data-end=\"1259\" class=\"\"\u003e\u003cstrong data-start=\"1230\" data-end=\"1259\"\u003e\u003cspan\u003eMaterial selection made with common sense\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e  \u003cp data-start=\"1260\" data-end=\"1535\" class=\"\"\u003e\u003cspan\u003eSpeed ​​Engineering relies on \u003c\/span\u003e\u003cstrong data-start=\"1288\" data-end=\"1329\"\u003e\u003cspan\u003ehigh-quality, dimensionally stable plastic\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e ,  which is specifically designed for use on the front of the vehicle. The material is robust, durable and offers excellent value for money – without compromising on quality or appearance.\u003c\/span\u003e\u003c\/p\u003e  \u003ch3 data-start=\"1537\" data-end=\"1587\" class=\"\"\u003e\u003cstrong data-start=\"1541\" data-end=\"1587\"\u003e\u003cspan\u003eEasy installation – screwed or glued\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e  \u003cp data-start=\"1588\" data-end=\"1848\" class=\"\"\u003e\u003cspan\u003eThe assembly can be done either with the \u003c\/span\u003e\u003cstrong data-start=\"1622\" data-end=\"1679\"\u003e\u003cspan\u003eThe supplied plastic insert nuts and screws are used.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003e take place \u003c\/span\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003e( \u003c\/span\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003eT\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003ethis can be done (TÜV-compliant method) or alternatively with \u003c\/span\u003e\u003cstrong data-start=\"1732\" data-end=\"1759\"\u003e\u003cspan\u003ehigh-strength 3M adhesive tape\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e .  One \u003c\/span\u003e\u003cstrong data-start=\"1766\" data-end=\"1785\"\u003e\u003cspan\u003eInstallation instructions\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003e receive \u003c\/span\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003eShe \u003c\/span\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003eautomatically \u003c\/span\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003ewith \u003c\/span\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003ethe \u003c\/span\u003e\u003cspan class=\"_fadeIn_4f9by_7\"\u003eOrder\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003eYou will automatically receive it with your order confirmation via email.\u003c\/span\u003e\u003c\/p\u003e  \u003ch3 data-start=\"1850\" data-end=\"1886\" class=\"\"\u003e\u003cstrong data-start=\"1854\" data-end=\"1886\"\u003e\u003cspan\u003eNote regarding fit:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e  \u003cp data-start=\"1887\" data-end=\"2090\" class=\"\"\u003e\u003cspan\u003eDue to manufacturing tolerances of the bumper, \u003c\/span\u003e\u003cstrong data-start=\"1943\" data-end=\"1965\"\u003e\u003cspan\u003eminimal gap dimensions\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e These can easily be smoothed out with a fine silicone sealant – for a clean, professional finish.\u003c\/span\u003e\u003c\/p\u003e  \u003ch3 data-start=\"2092\" data-end=\"2138\" class=\"\"\u003e\u003cstrong data-start=\"2096\" data-end=\"2138\"\u003e\u003cspan\u003eUnpainted for individual design\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e  \u003cp data-start=\"2139\" data-end=\"2334\" class=\"\"\u003e\u003cspan\u003eThe canards will \u003c\/span\u003e\u003cstrong data-start=\"2158\" data-end=\"2172\"\u003e\u003cspan\u003eunpainted\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e delivered so that you can perfectly match them to your vehicle design – whether in car color, glossy black or matte look – the decision is yours.\u003c\/span\u003e\u003c\/p\u003e  \u003chr data-start=\"2336\" data-end=\"2339\" class=\"\"\u003e  \u003cp data-start=\"2341\" data-end=\"2573\" class=\"\"\u003e\u003cstrong data-start=\"2341\" data-end=\"2522\"\u003e\u003cspan\u003eNow you can get Speed ​​Engineering canards with TÜV certification for your BMW M2 G87 at [website\/store name] upgrademycar.shop Order now – for more performance, racing look and legality on the road.\u003c\/span\u003e\u003c\/strong\u003e\u003cbr data-start=\"2522\" data-end=\"2525\"\u003e\u003cspan\u003e  👉  \u003c\/span\u003e\u003cstrong data-start=\"2528\" data-end=\"2573\"\u003e\u003cspan\u003eDiscover now at \u003c\/span\u003e\u003ca data-start=\"2550\" data-end=\"2571\" rel=\"noopener\" href=\"http:\/\/www.upgrademycar.shop\"\u003e\u003cspan\u003ewww.upgrademycar.shop\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Speed Engineering","offers":[{"title":"Default Title","offer_id":50324116996443,"sku":"25892","price":190.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/6127\/8299\/files\/0O4A7247-scaled.jpg?v=1743269406"}],"url":"https:\/\/www.upgrademycar.shop\/en\/collections\/speed-engineering-en.oembed","provider":"UPGRADEMYCAR","version":"1.0","type":"link"}